GENERAL   EQUIPMENT   INC.                    

 

8724 Sunset Drive #191 Miami FL 33173 · USA                                  

                                                  
Email:
info@generalequipment.infowww.generalequipment.info                                                       


 

 

 

TOYOTALCHATCH

 

 

TYPE:

Armored Vehicle

DESCRIPTION:

Presidential Toyota Land Cruiser with Hatch & Oxygen System

PRICE:

Upon Request

PACKING:

Ex-Works

 

 

PRESIDENTIAL TOYOTA LAND CRUISER WITH HATCH & oxygen system

 

 

SPECIFICATIONS AND TERMS FOR ARMORED VEHICLE

“NEW ARMORED TOYOTA LAND CRUISER”

 

 

 

 

 

  • TOYOTA LAND CRUISER
  • FULLY LOADED
  • 4 SPEED AUTOMATIC TRANSMISSION
  • NAVY BLUE EXTERIOR or Any Color
  • TAN (IVORY) INTERIOR or Client's check
  • LEFT HAND DRIVE
  • LEATHER INTERIOR
  • AIR CONDITIONING
  • PACKAGE COMBINATION #A

Adaptive Variable Suspension (AVS) with Adjustable Height Control (AHC) and automatic load leveling

Color-keyed rear spoiler

Curtain and side airbags (1st and 2nd row Curtain Shield Airbags) with Roll Sensor and Drive and Front Passenger Side Airbags

Navigation System-includes voice-activated DVD navigation system with 7-in. display and backup camera

Bluetooth® wireless technology

Integrated audio and climate controls

JBL® AM/FM Cassette/center console-mounted 6-disc CD/DVD changer

Seven speakers 300 watts (maximum output)

FM diversity reception and adjustable power antenna

Roof Rack and Running Board Package-includes roof rails with cross bars and running boards

 

 

BASE ARMORED EQUIPMENT

 

  • All four (4) doors armored using 10 mm ballistics steel that has been previously tested at the H.P. White Laboratory to defeat the following in non transparent areas:

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

  • Windshield is 40.69 mm thick that has been previously tested to defeat the following with a sample size of 20” x 20” at a 35º angle

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

  • Transparent armor for doors is 46 mm thick that has been previously tested to defeat the following with a sample size of 20” at a 35º angle

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

  • Oblique, Front and Rear of vehicle armored using 10 mm ballistics steel that has been previously tested at the H.P. White Laboratory to defeat the following in non transparent areas

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

 

  • Floor armored using 3 mm ballistics steel and 3 mm mild steel to act as an absorbent against blast

 

  • All pillar posts, side panels, kick-panels, firewall, and headers, cargo area, rear wheel arches, rear cargo doors will all be armored using 10 mm ballistics steel that has been previously tested at the H.P. White Laboratory to defeat the following in non transparent areas

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

  • Overlap System around each window will be used throughout the vehicle to ensure complete protection armored using 10 mm ballistics steel that has been previously tested at the H.P. White Laboratory to defeat the following in non transparent areas

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

  • Battery and computer armored using 10 mm ballistics steel that has been previously tested at the H.P. White Laboratory to defeat the following in non transparent areas

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

  • Run-Flats installed in all tires with 1 spare

 

  • Rear door kept original with armored swing door directly behind original.  Swing door will have transparent armor measuring 36” X 12” for full viewing capacity.  The thickness of the transparent armor is 46 mm and   The door will be armored using 10 mm ballistics steel that has been previously tested at the H.P. White Laboratory to defeat the following in non transparent areas

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

  • Rear cargo side panels to have 12” X 8” transparent armor inserts to be 46 mm thick to defeat the following in non transparent areas

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

  • Gas Tank armored using 10 mm ballistics steel that has been previously tested at the H.P. White Laboratory to defeat the following in non transparent areas

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

  • Custom Operational Roof Hatch measuring 30” x 30”  fully armored using 10 mm ballistics steel that has been previously tested at the H.P. White Laboratory to defeat the following

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

Hatch can only open and close from inside vehicle.  Hatch stays up protecting rear side (back) of person standing.

 

Please note this is a custom production design

 

Oxygen System Specifications:

  • Uses an expensive state of the art refillable lightweight aluminum cylinder holding 240 liters of oxygen. At a flow of 6LMP.
  • Includes a universally refillable M9 cylinder with a CGA-540 valve
  • Includes a Western Medica durable yet compact variable flow regulator, adjustable from ½ - 8 liters per minute.  Optional higher-flow regulator is availible (see below).
  • Self-stores inside a sleek, lightweight and water resistant bag
  • Includes an instruction system that allows our kit to fully meet and exceed all federal government rules and regulations
  • Includes detailed safety and regulatory instructions for safely administering E/Pax emergency oxygen
  • Includes access to a comprehensive oxygen refill locations list
  • Includes an oxygen delivery mask with all components necessary to safely use the oxygen

 

 

BALLISTIC SPECIFICATIONS

 

  • 7.62 x 51mm   B6 European Ballistic Standards EN1063

 

BALLISTIC STEEL

 

  • All 10mm ballistic armored steel has been previously tested at the H.P. White Laboratory and is tested to defeat and withstand a range of ballistic requirements including:

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

 

TRANSPARENT ARMOR

 

  • All ballistic transparent armor has been tested and certified to defeat all requirements including the following:

 

7.62 x 51mm         B6 European Ballistic Standards EN1063

  

The recommended thickness of the transparent armor windshield is 40.69 mm for the windshield and 46 mm for the side and rear windows by our manufacturer.

 

 

 

 

 

Specification and photos are not contractual and are subject to verification upon inspection

 

 

TAKE NOTICE!

 

PLEASE BE ADVISED THAT INFORMATION INCLUDED IS CONFIDENTIAL IN NATURE AND IS BASED ON PREXISTING BUSINESS RELATIONSHIP WITH THE LEGAL OWNER OF PROPERTY DESCRIBED HEREIN (IF APPLICABLE). AS SUCH, UPON RECEIPT OF SAID INFORMATION THE RECEIVER AKNOWLEDGES THAT ANY UNAUTHORIZED CONTACT WITH SAID LEGAL OWNER WILL BE CHARACTERIZED AS A BREACH OF CONFIDENTIALITY AND SAID AGREEMENT MAY BE ENFORCED UNDER EXISTING LAW OR IN EQUITY.

 

This paper was prepared by General Equipment Corp.
The paper represents an offer of a partner of General Equipment Corp.
All rights are reserved by and for General Equipment Corp..
All content and ideas of this paper are the property of General Equipment Corp.