GENERAL   EQUIPMENT   INC.                    

The assault rifles 5.45 mm AR-M1 and AR-M1F   belongs to the firearms whose action is based on the principle of conveying a part of the powder gases through a special port in the wall of the stationary barrel and their influence onto the bolt frame.
The barrel chamber is closed by turn of the bolt and engaging the firing stops in the receiver.
The weapons are fed from a 30 round arcuated staggered black polymer magazine.  
The sigh consists of sectors marked for shooting at a distance of up to 1000 m.
The hammer-trigger mechanism has a hammer, which is activated by firing spring. This mechanism has a safety device-safety for setting from single to automatic fire mode as well as contrariwase. The safety simultaneously serves as well as a safety level preventing the accidental shoots. It is located on the right hand side of the receiver and is formed as a long pivoted lever. When set in the utmost upper position the trigger is blocked. In this position the safety serves two other functions:
         -  prevents contaminating of the receiver through the bolt carrier handle slot in the receiver cover;
         -  prevents from reloading the barrel chamber.
The butt, lower hand guard and the upper hand guard are made of highly strong and hardy black polymer.
The Assault Rifle design allows the attachment of 40x46mm ARSENAL UBGL-M6, 40mm UBGL or GP-25 Underbarrel Grenade Launchers, and firing with them.

Extras: sight rail for sighting device, blank fire attachment, knife – scissors