GENERAL   EQUIPMENT   INC.                    

	Convenient controls allow, even in gloves, to switch on/off the sight, the built -high-quality illuminator and to adjust brightness of the aim mark as well as to focus the sight.
	The switch - on indicator allows controlling the current condition of the device. At the same time it serves as an indicator of the battery discharge to control its state. When the battery is discharged the indicator become red.
	The additional rod of fastening located on the case of the sight allows to use a hinged IR-illuminator (laser  or diode) which enables to increase the distance of  detection and recognition considerably.

 

	It is possible to use different power supplies.
	Collimating mark of red color provides convenient and exact aiming.

 

---

 

Night vision sight D741M (GEN 2+, 3) PROFFESIONAL

 

 

Night vision device D761 is destined for aiming shooting at dusk and at night. A housing made from aluminum alloys provides optimal mixture of weight and reliability. High optic characteristics provide comfortable observation and allow detecting and recognizing the aim at long distances. Impermeability and reliability provide a reliable use of the sight even in difficult working conditions.

	Adjustment to the distance is made with the help of the knob which provides inside objective focusing.
	Operating of the sight modes is located on the left side of the housing.
	Operational changing of the reticle color is possible red-yellow-green.
	Smooth adjustment of the reticle brightness.
	Possibility of filling with nitrogen.
	A cartridge for dewatering is installed in the device.
	Indication of a switched device allows to control the current status of the device.
	Usage of batteries АА or СR123 is possible.
	When the battery status is low, the indicator is red. (Low battery status is marked in the field of vision by the red indicator).
	Remote control is possible.
	There are various variants of mounting to the weapon.
	A case for keeping and transporting the mounted sight is included in the unit.
	A mount allows to install powerful hinged IR illuminator.

 

---

 

Night vision sight D941 (GEN 2+, 3)

 

 

Night vision device D941 - is a fundamentally new working out in the sphere of night vision sights. Its optic system allows to  change the sight magnification from 3,85x up to 7,7x. It provides easy aim search at the magnification of 3,85x (angle of vision 10) and exact aiming at the magnification of 7,7x (angle of vision - 5).

 

	Adjustment to the distance is made with the help of the knob which provides inside objective focusing.
	Switching on the sight is performed with the help of turning the left knob.
	Operational changing of the reticle color is possible yellow-green-red.
	Smooth adjustment of the reticle brightness.
	Magnification of the sight is possible just rotate the ring from 3,85 up to 7,7x.
	Filling with dry nitrogen is possible for preventing lens weeping from inside.
	A cartridge for dewatering is installed in the device.
	Indication of a switched device allows to control the current status of the device.

 

 

---

 

Night vision binocular D221B (GEN2+/3)

 

 

Night vision binocular D221Н is a device for the professionals who are demanding much of quality of the image. Binocular configuration of the device and special optics provide the high-quality three-dimensional image that provides increase of the distance of recognition in 1,3-1,5 times, in comparison with devices with pseudo-binocular circuit.

They are intended for performance of various kinds of activity in conditions of low light exposure at which it is required to find outand distinguish the mobile and motionless objects which are in the distance upto 500 meters.

The design of binocular D221B allows to use tubes of 2 + and 3 generations from the leading world manufacturers. The case from light alloys of aluminum provides durability and reliability in operation.

 

It has a number of distinctive features:

 

	Conveniently located push as well as the built-in IR-illuminator. The switch binocular D221B.
	The built-in IR-illuminator allows to use the device in full darkness and has an opportunity of adjustment of the light spot size. It works on the wave length of 880 Nanometers and i eye That provides observation security.
	The optical system of oculars provides comfortable observation with the distance between eyes from 60 to68 mm without any additional adjustment.
	It is possible to install 2 types of lenses for getting the magnification of 3,1x or 4,6x.
	The special slot located on the case allows to fix an additional IR-illuminator (laser or diode) which enables to increase the distance of detection and recognition considerably.
	Having fixed the helmet-mask and replaced the lenses you can transform the binocular into goggles.

 

 

---

 

Night vision sight DEL-2 (GEN 2+, 3)

 

 

This night vision sight gives an opportunity to utilize during the day.

It is made in the case from aviation alloys of aluminum that provides durability, reliability.

Fast and simple switching from a night mode on day time and back is carried out with the help of the convenient shift knob.

Smooth adjustment of the reticle brightness.

Usage of batteries АА or СR123 is possible.

High-aperture objective with inside focusing.

The additional rod of fastening located on the case of the sight allows to use a hinged IR enables to increase the distance of detection and recognition considerably.

 

 

---

 

Monocular D126H (GEN 2+, 3) PROFFESIONAL

 

 

Monocular of night vision D126H is a multipurpose device which due to its characteristics corresponds to the highest requirements of various groups of professionals who require high quality of the image, big range of detection and recognition.

Depending on the complete set of delivery monocular D126H can be used in conditions of low light exposure for various kinds of activity - from orientation on small distances and in the closed spaces (having thus free hands) to observation over mobile and motionless objects in the significant distance (up to 600 meters).

The design of monocular allows to use tubes of 2 + and 3 generations produced by the leading world manufacturers.

It has a number of distinctive features:

 

	The case from light alloys of aluminum provides durability and reliability, and the special rubber overlay provides comfortable holding in hands.
	Conveniently located push-button control allows quickly to switch on/off the device and built built-in IR illuminator.
	The switch-on indicator allows controlling the current condition of the device.
	There is an indicator of the built-in IR-illuminator in sight of the device which allows to control its current condition.
	The built-in IR-illuminator allows to use the device in full darkness and has an opportunity of adjustment ofthe light spot size. It works on the wave length of 880 Nanometers and practically is unseen by the naked eye that provides observation security.
	It is possible to use two types of objectives which in the device give magnificationof 3,2х и 4,3х.
	It is possible to install an additional IR-illuminator (laser or diode) which allows to increase considerably the distances of detection and recognition.

 

 

A comfortable helmet-mask allows quickly and in the optimal way to fix the device on the head in relation to eyes and provides stability of this position even at intensive movements.

 

 

With brackets МК123 or МК124 monocular D126H can be used together with a day telescopic sight.

 

 

---

 

Night vision sight D741M (GEN 2+, 3) PROFESSIONAL

 

 

Monocular of night vision D127 is made of shock resistant housing form super-constructional plastic. Little weight, excellent design and ergonomics make this device irreplaceable for fulfilling professional tasks. Multifunctional and efficiency make make it superior to its analogues. Installing of the tubes of gen. 2+, 3 of the leading producers.

 

	A light weight shock resistant housing form plastic. Waterproof.
	Specially made switch excludes spontaneous switching of IR illuminator.
	IR illuminator head gives an opportunity to set up the size of spot light and to magnify its operating distance.
	Indicator of switching on the built-in IR illuminators is installed in the field of vision. It allows to control their status.Built-in protection from bright flashes switches off the device when it falls in a great light flux. It protects the tubefrom damage in most cases.Low
	Low battery status is marked in the field of vision by the red indicator. It allows to control its status.Filling with dry nitrogen is possible for preventing lens weeping from inside.
	A monocular can be mounted at the back of day collimator sights EOTECH and AIMPOINT with the help of a special bracket МК 129 for shooting in conditions of low illumination.
	A monocular D127 has a big eyepiece diameter, what provides a comfortable image. Eye relief of 42 mm allows to reduce the possibility of eye damage while shooting in conditions of low visibility, using a monocular at the back of the day sights.
	There is a possibility of operating via remote control. Quite comfortable and efficient when mounting the monocular to the weapon.

 

 

---

 

Night vision goggles D221 (GEN 2+, 3) PROFFESIONAL

 

 

Night vision goggles D221H - are the device for the professionals who are demanding much of quality of the image. Binocular design of the device and special optics provide the high high-quality three-dimensional image that provides increase of the distance of recognition in 1,3 - 1,5 times, in comparison with the devices with the pseudo pseudo-binocular circuit (see D203M is applied, D206H).

They are intended for performance of various kinds of activity in conditions of low light exposure at which it is required to orientate on the small distances, the closed spaces and to have free hands. It is made waterproof, has a feasibility of filling with nitrogen, it has a built-in cartridge for preventing lens from inside weeping

The design of goggles D221H allows to use tubes of 2 + and 3 generations from leading world manufacturers. The case from light alloys of aluminum provides durability and reliability in operation.

 

 

---

 

Night vision sight D641 (GEN 2+, 3)

 

 

Night vision sights D641M have the following features:

Reliability, precision and comfort - Shock-resistant body comprising of light alloys of aluminum, modern design and ergonomics. An option to install additional infrared diode and laser lights. Possibility to attach them to all mounts.

 

	Collimating mark of red color provides convenient and exact aiming.
	Adjustment to the distance is made with the help of the knob which provides inside objective focusing.
	Operational changing of the reticle colour is possible yellow-green-red.

 

 

 

Specification and photos are not contractual and are subject to verification upon inspection