|
|
GENERAL EQUIPMENT INC.
8770 Sunset Drive #191 ● Miami FL 33173 · USA
7 |
17 MW
|
TYPE: |
Power |
|
DESCRIPTION: |
17 MW Power Plant |
|
PRICE: |
Upon Requet |
|
PACKING: |
Ex-Depot |
siemens 17 MW sgt-500
Subject unsold or market withdrawal
From new manufacture




|
2 units SGT 500 never used
1. EQUIPMENT OVERVIEW SIEMENS SGT-500 GAS TURBINES Quantity: Two (2) Units Available Condition: New Surplus / Zero Hours Manufacturing & Storage Manufactured in 2007 New surplus, never used Zero operating hours Stored strictly in accordance with OEM preservation procedures Originally supplied for a project that was canceled
Certification Marine Rated DNV (Det Norske Veritas) certified
2. GAS TURBINE TECHNICAL DATA Model: Siemens SGT-500 Configuration: Single-shaft industrial gas turbine Fuel: Dual fuel Natural Gas / Diesel Frequency Capability: 50 / 60 Hz
Power Output (ISO conditions indicative) Natural Gas: approx. 17.4 MW Diesel: approx. 17.0 MW (Output may be slightly higher depending on site conditions)
Performance Specific Fuel Consumption 221 g/kWh (Natural Gas) 262 g/kWh (Diesel) Heat Rate 11,066 kJ/kWh (Natural Gas) 11,200 kJ/kWh (Diesel)
3. GENERATOR PACKAGE Manufacturer: ABB Year: 2007 Type: AMS 900 LH Rated Output: 20,400 kVA @ 35°C Voltage: 13.8 kV Frequency: 60 Hz (or 50 Hz upon request) Speed: 1,800 RPM Power Factor: 0.8 Type: Synchronous generator
4. GEARBOX Manufacturer: Flender Graffenstaden (France) Rated Power: 22,500 kW Gearbox supplied complete with couplings and coupling guards
5. LUBE OIL SYSTEM Supplier: Flenco Group Marine rated Complete lube oil system included Fin-fan type lube oil cooler included
6. SCOPE OF SUPPLY SKID-ONLY PACKAGE (INCLUDED) Gas Turbine Package B003711 and Gas Turbine Package B003712 -SGT 500 power turbine and Gas Generator -ABB AMS 900 LH Electrical Generator (to be shipped separately, brand new) -Intake and Exhaust System -Lubricant Oil System -Liquid Fuel System -Fuel Forwarding Pump Skid -Gas Fuel System -Gear System: Gearbox with coupling and coupling guards -Compressor Wash System -Air Intake System: Turbine combustion air inlet casing -Exhaust System: Exhaust Plenum -Cooling System: Fin type lube oil cooler -Complete lube oil system -Base Frame, Enclosure and Platform
7. MOST RECENT VIDEO
8. PRICE SKID-ONLY GAS TURBINE PACKAGE
Available for immediate shipment We hereby do confirm that according to protocol of Siemens the turbines have been maintained and rotated. Please note we will supply one year warranty or 8000 hours , by Siemens Shop. If you are genuinely interested, the process is simple: 1. Agreement on commercial structure 2. Signature of proforma invoice 3. Deposit payment + inspection fee 4. International inspection report 5. Final balance payment
6. Immediate release and shipment
The escrow agreement will stipulate that the
initial inspection-related costs (Regarding inspection: The only acceptable
method is an internationally recognized inspection company performing a full
technical audit, including boroscope inspection and full mechanical
verification. The cost is 20,00025,000 per unit and is fully standard for
assets of this class are to be covered through the escrow arrangement) are
to be covered through the escrow arrangement.
That said, I am willing to assist in
addressing your concerns. If your primary objective is to verify the
availability of the units, I can facilitate this upon receipt of your Letter
of Intent (LOI) and Proof of Funds (POF). Verification can be provided via a
video recording clearly showing the equipment, along with documentation
displaying your company name. Please note that the full payment must be done once inspection confirms that the equipment is available and in zero hours condition. At that stage, the transaction will be considered final. We will then proceed with the handover of the units to your nominated shipping company, and the escrow agent will also release the funds to us accordingly. |
See details at:
![]()
POL 2 units
SGT 500 Middle East.mp4

SGT500picand drawings.docx
Specification and photos are not contractual and
are subject to verification upon inspection
TAKE NOTICE!
PLEASE BE ADVISED THAT INFORMATION INCLUDED IS CONFIDENTIAL IN NATURE AND IS BASED ON PRE-EXISTING BUSINESS RELATIONSHIP WITH THE LEGAL OWNER OF PROPERTY DESCRIBED HEREIN (IF APPLICABLE). AS SUCH, UPON RECEIPT OF SAID INFORMATION THE RECEIVER ACKNOWLEDGES THAT ANY UNAUTHORIZED CONTACT WITH SAID LEGAL SELLER WILL BE CHARACTERIZED AS A BREACH OF CONFIDENTIALITY AND SAID AGREEMENT MAY BE ENFORCED UNDER EXISTING LAW OR IN EQUITY.
This paper was
prepared by General Equipment Inc.
The paper represents an offer of a partner of General Equipment Inc.
All rights are reserved by and for General Equipment Inc.
All
content and ideas of this paper are the property of General Equipment Inc.