GENERAL EQUIPMENT INC.
8724 Sunset Drive #191● Miami FL 33173 · USA
From New Manufacture
The world's Leading flood ProtectionMade in USA
The answer to flood protection when you are not in the position to erect permanent flood barriers.
The system is designed for Easy Installation, Easy Dismantling, Easy Disinfection, Easy storage and multiple reuses.
The system is designed to configure to the natural turns of the landscape or architecture. The system is available in 4, 6, 7 and 8 heights.
The system is stored on pallets stacked nine (9) high that can be delivered on the back of a pickup truck from your warehouse. A crew can install 150 linear feet in one hour.
You do not need any special equipment or additional materials to make the system work. The system is a complete system designed for flood protection and designed to store easily.
After the flood waters have receded the system is quickly folded and stacked and stored.
Flood waters and standing waters pose various risks, including infectious diseases, chemical hazards, and injuries.
CDC, U.S. Government
All flood protection products have been exposed to sewage, infectious disease, and chemical hazards and must be disinfected and cleaned following a flood.
In systems that require any filler materials such as sand or water they must be disposed of as a Level 3 contaminant which will add dramatically to your cost.
The system is a self contained system with no additive and can be washed down like other equipment without special disposition.
The system is easily washed with a commercial disinfectant and is ready to go back into storage immediately after.
The system is designed for easy storage. Each panel folds in half and is stackable to 9 high. We provide a palletized storage case for the nine panels. This storage case is capable of being stacked 4 high. You can store 36 panels in 28 sq feet of real estate or store on your warehouse racking.
If you chose to store outside we suggest covering with a tarp.
The system is made of the world finest marine hardwood. Marine hardwood is a 7 layer birch ply with no air pockets and passing extraordinary strength tests. All hardware is tested aluminum and steel and can withstand the pressure of water. This is simple system that is engineered beyond the forces that flood waters will exert on it.
The storage design allows the panels to store easily, safely and stackable so that they can be warehoused between uses.
The system is designed in a way that all parts are replaceable if damaged.
The system is a onetime purchase with years of use and reuse.
MOBILE & EASILY TRANSPORTED
Flat packs are easily transported to flood sites by crate and lifted into place.
COST EFFECTIVE & REUSABLE
Cost of initial deployment is comparable to sandbags, but may be reused up to 60 times.
UNIQUE PATENTED DESIGN
The only flood protection system that becomes stronger when flood waters reach it.
RAPID DEPLOYMENT & REMOVAL
A team of 10 people can install or dismantle 150 feet of barricade per hour.
Quickly and safely cleaned after deployment.
Customizable barriers defend structures of any length or shape from flood heights up to 8 feet.
A proven lost cost protection for entrances. When a flood is forecast the system can be quickly erected in front of an entrance. In less than an hour the fence is in place. When the flood water recede the fence is quickly taken down, easily cleaned and disinfected with a garden hose, stacked and stored. An easy fast solution to getting your building opened again.
In all Flood barriers it is most important to be able to have a water tight seal where the barrier meets the building. This unique system designs and builds a custom closure when a standard closure will not work.
Reuse and Storage: it is designed for easy storage. Each panel folds in half and is stackable to 9 high. We provide a palletized storage case for the nine panels. This storage case is capable of being stacked 4 high. You can store 36 panels in a foot print of only 28 sq feet or store in your warehouse racking system.
Rapid deployment around a building or opening within hours of a pending flood event. Constructed of marine grade laminate, stainless steel, aluminum and reinforced PVC canvas, AquaFence systems become stronger as floodwater pressure is applied.
A team of 8-10 people can assemble 150 linear feet of 4-foot high panels in less than one hour.
This flood protection barrier systems perform effectively without the need for anchoring to the ground. In high-wind situations however, anchors will provide added stability and enhanced performance.
V1200 Outside Corner 90 Degrees
Side closure panels provide an effective tie-in to a fixed surface and a starting point for a string of panels in a barrier system.
Where architecturally necessary, side closers can be customized to the building surface.
The system is designed to withstand impact from moving debris.
Damage to individual components may occur but without system failure.
In order to minimize damage, some customers choose to purchase systems with installed protective shields.
Specification and photos are not contractual and are subject to verification upon inspection
PLEASE BE ADVISED THAT INFORMATION INCLUDED IS CONFIDENTIAL IN NATURE AND IS BASED ON PRE-EXISTING BUSINESS RELATIONSHIP WITH THE LEGAL OWNER OF PROPERTY DESCRIBED HEREIN (IF APPLICABLE). AS SUCH, UPON RECEIPT OF SAID INFORMATION THE RECEIVER ACKNOWLEDGES THAT ANY UNAUTHORIZED CONTACT WITH SAID LEGAL SELLER WILL BE CHARACTERIZED AS A BREACH OF CONFIDENTIALITY AND SAID AGREEMENT MAY BE ENFORCED UNDER EXISTING LAW OR IN EQUITY.
This paper was
prepared by General Equipment Inc.
The paper represents an offer of a partner of General Equipment Inc.
All rights are reserved by and for General Equipment Inc.
All content and ideas of this paper are the property of General Equipment Inc.